Engine Power: Approx. 319 kW (428 hp)
Operating Weight: Approx. 70,000 – 75,000 kg (depending on configuration)
Maximum Reach (Ground Level): Approx. 18.0 meters (with material handling boom)
Maximum Lifting Capacity: Varies by arm configuration; typically over 10,000 kg at extended reach
Hydraulic System Pressure: 35,000–38,000 kPa
Travel Speed: Up to 4.5 km/h
| Field | Details |
|---|---|
| Code machine | 00033165 |
| Make | Caterpillar |
| Model | 424 - 4x4 / 4WD / AC |
| Unused | Yes |
| Year | 2024 |
| Location | BIG 5 Douane entrepot |
| Weight | — (Not specified) |
| A/C | Yes |
| Axle configuration | 4x4 |
| Cabin type | Closed |
| Drive control | 4x4 |
| Driven | Wheeled |
| Tyres (%) | 100% |
| Hour meter shows | 5 |
| Field | Details |
|---|---|
| Code Machine | 00033166 |
| Make | Caterpillar |
| Model | 424 - 4WD / AC |
| Unused | Yes |
| Year | 2024 |
| Location | BIG 5, Douane Entrepot |
| Weight (Kg) | 8045 |
| A/C | Yes |
| Axle Configuration | 4x4 |
| Drive Control | 4x4 |
| Driven | Wheeled |
| Tyres (%) | 100% |
| Hour Meter Shows | 5 |
| Field | Details |
|---|---|
| Code machine | 00033233 |
| Make | Caterpillar |
| Model | 424 4x4 Backhoe Loader |
| Serial number | CAT00424CJJ400543 |
| Unused | Yes |
| Year | 2025 |
| Location | BIG 5 Douane entrepot |
| Weight (Kg) | 8045 |
| Drive control | 4x4 |
| Driven | Wheeled |
| Engine Model | CAT C3.6 |
| Tyres (%) | 100% |
| Hour meter shows | 7 |
Base Model: Caterpillar 725 Articulated Truck
Engine: CAT C11 ACERT or C13 (model dependent)
Net Power: Approx. 309–324 hp (230–242 kW)
Drive Configuration: 6×6 full-time all-wheel drive
Tank Capacity: Varies by build – typically 20,000 to 30,000 liters (customizable)
Transmission: 6-speed automatic planetary power shift
GVW (Gross Vehicle Weight): Approx. 45,000 – 55,000 kg (varies with tank size)
Cab: Enclosed ROPS/FOPS with ergonomic controls and climate system
Suspension: Front – independent, rear – A-frame bogie suspension
Model: Caterpillar 735C
Drive Configuration: 6×6 All-Wheel Drive
Payload Capacity: 32,000 kg (32 tonnes)
Heaped Capacity: Approx. 20.1 m³
Engine: Cat C15 ACERT™, 6-cylinder, turbocharged diesel
Engine Output: Approx. 316 kW (424 hp)
Torque: Approx. 2,100 Nm
Transmission: Cat CX38 High Density Power Shift – 8 forward / 1 reverse
Top Speed: Up to 58 km/h
Braking System: Oil-cooled, multiple disc brakes with automatic retarder
Dump Cycle Time: Raise – approx. 12 sec / Lower – approx. 8 sec
Operating Weight (Empty): Approx. 28,200 kg
Loaded Weight (GVW): Approx. 60,200 kg
Model: Caterpillar 740B
Drive Configuration: 6×6 Articulated All-Wheel Drive
Payload Capacity: 42,000 kg (42 tonnes)
Heaped Body Capacity: Approx. 25 m³
Engine: Cat C15 ACERT™, 6-cylinder turbocharged diesel
Engine Output: Approx. 365 kW (489 hp)
Transmission: Cat 7-speed automatic with electronic control
Max Speed: Up to 58 km/h
Braking System: Oil-cooled, multiple disc brakes with automatic retarder
Body Raise Time: Approx. 12 seconds
Body Lower Time: Approx. 10 seconds
Operating Weight (Empty): Approx. 32,500 kg
Gross Vehicle Weight (Loaded): Approx. 74,500 kg
Model: Caterpillar CB534D
Type: Tandem Vibratory Asphalt Roller
Operating Weight: Approx. 10,800 – 11,200 kg
Drum Width: 2,000 mm (front and rear)
Drum Diameter: Approx. 1,200 mm
Centrifugal Force: Approx. 60 – 85 kN (varies by amplitude setting)
Amplitude: Approx. 0.5 mm (high) / 0.3 mm (low)
Frequency: Approx. 50 – 60 Hz
Engine: Caterpillar 3054C
Engine Output: Approx. 97 – 100 kW (130 – 134 hp)
Emission Compliance: CE / EPA Tier 2 or Tier 3
Water System: Pressurized, dual pump with multiple spray nozzles
Fuel Tank Capacity: Approx. 250 liters
Cab: ROPS/FOPS certified, optional climate control and adjustable seat
Model: Caterpillar CS76 XT
Type: Single Drum Vibratory Soil Compactor
Operating Weight: Approx. 16,000 – 17,000 kg (varies with configuration)
Drum Width: 2,134 mm
Vibratory System: Dual amplitude and dual frequency
Centrifugal Force: Up to 335 kN
Amplitude Settings: High: ~1.9 mm / Low: ~0.95 mm
Frequency: 30–33 Hz
Engine: Cat C7.1 ACERT™ – 6-cylinder turbocharged diesel
Engine Power: Approx. 186 kW (249 hp)
Drive Type: Rear axle and drum drive (XT for added traction)
Gradeability: Up to 55% with vibration
Fuel Tank Capacity: Approx. 320 liters
Braking System: Hydrostatic with spring-applied parking brake
Emission Compliance: Tier 4 Final / Stage IV
Model: Caterpillar D10N
Engine: CAT 3412 V12 Diesel
Net Power: Approx. 520–550 hp (388–410 kW)
Operating Weight: Approx. 70,000 – 72,500 kg
Transmission: 3-speed Powershift with torque converter
Blade Options: Semi-U Blade, U-Blade, or Dual Tilt
Blade Capacity: Approx. 19 – 22 m³ (varies by blade type)
Ripper Options: Single-shank or multi-shank (optional)
Undercarriage: Elevated sprocket design for reduced wear and better maneuverability
Cab: ROPS/FOPS enclosed or open canopy (varies by unit)
Model: Caterpillar D6 LGP
Type: Crawler Dozer – Low Ground Pressure
Operating Weight: Approx. 22,500 – 24,500 kg
Engine Model: CAT C9.3B
Net Power: 215–225 hp (160–168 kW)
Transmission: Fully automatic 4-speed powershift
Undercarriage: LGP wide-track configuration
Track Shoe Width: Typically 915 mm (36 in)
Ground Pressure: Very low – ideal for soft terrain
Blade Type: VPAT (Variable Pitch Angle Tilt)
Blade Capacity: Approx. 4.5 – 5.8 m³
Cab: ROPS/FOPS certified, pressurized, climate-controlled, with touchscreen display
Grade Technology: CAT Slope Assist standard, optional Grade with 3D integration
